Contact us 888-876-2377

RB 4300 – Surface Mounted Road Blade Tire Shredders – Technical Specifications

RB 4300 - Surface Mounted Road Blade Tire Shredders - Technical Specifications

Actuator Box

  • Houses 850 lbs. torque motor
  • Receives input commands and power from the Pole Mount Box.
  • Easy to install and remove MIL SPEC connections on the back of the box
  • Raises and lowers the blades for the system.
  • Painted black with marine epoxy coat finish
tire shredders actuator box

Individual Blades

  • Blade height is 2 3/4 inches; width is 3 7/8 inches.
  • When active, the blades are spaced 4 inches apart.
  • Blades are field serviceable and replaceable.
  • Comprised of 17-4PH Stainless Steel, CB7Cul, ASTM A747.
  • Solution annealed and aged (H925 condition) to a hardness of RC38 min.
  • Finish of Blades are 125 RMS.
  • Blades are power coated black.
tire shredder blade

Pole Mount Box

  • Power requirement:120 Volts (240 Volts available upon request) 5 Amps per system.
  • MIL SPEC plugs are used to connect wires to the system.
  • Allows integration with other security devices.
  • Control cable wire- 7 strand 16 gauge with an outside diameter of .278 inches.
  • Power cable wire- 3 strand 12 gauge with an outside diameter of .307 inches.
  • Input power runs to the Pole Mount Box and then is dispersed out of the control box.
  • System can be run off of either direct AC or DC power.
  • FREE  DC battery back-up for mentioning this site
tire shredder electical

Road Blade Modules

  • 7 modules per basic 12 ' system
  • Individual modules are 20 inches long, 6 5/8 inches wide and 1 1/4 inches high.
  • Each module contains five individual retractable stainless steel blades.
  • Two modules are required per one anchor plate
  • Able to withstand 52 tons of pressure.
  • Comprised of 356 T51 Aluminum, weighing 17 pounds.
  • Black marine epoxy paint coating to resist corrosion.
  • Blades are field serviceable and replaceable.
tire shredder module

Activation Pendant

  • Pendant box houses wireless receiver.
  • Standard cable length is 30 feet.
  • Red push button raises blades, green push button lowers blades.
  • Red indicator light alerts user blades are up.
  • Green indicator lights alerts user blades are down.
  • Two channel transmitter allows wireless remote control.
  • Optional wireless remote control provides 300 feet line of sight capability.
tire shredders pendant

Power Cable

  • Standard length of 20 feet - additional lengths available upon request.
  • 8 gauge 2 conductor with ground wire.
  • Provides power to the actuator box.
  • Pigtail connection run through junction box and conduit. Terminates at labeled pigtail inside Pole Mount Box.
tires shredders power cord

Communication Cable

  • Standard length of 20 feet- additional lengths available upon request.
  • 16 gauge 7 conductor wire.
  • Provides input commands to the actuator motor to raise and lower the blades.
  • Pigtail connection runs through junction box and conduit. Terminates at labeled pigtail inside of Pole Mount Box.
communications cable for tire shredders

Call now to talk to someone for more information at 888-876-2377