Contact us 888-876-2377

Gates, Lights, and Accessories

To make it easier on you, we list the available accessories. Please call with any questions.

 

Additional Road Blade Modules:

Can be added to surface, flush or portable systems.

  • Individual modules are 20 inches long, 6 5/8 inches wide and 1 1/4 inches high.
  • Each module contains five individual retractable stainless steel blades.
  • Two modules are required per one anchor plate
    Able to withstand 52 tons of pressure.
  • Comprised of 356 T51 Aluminum, weighing 17 pounds.
  • Black marine epoxy paint coating to resist corrosion.
  • Blades are field serviceable and replaceable.
tire shredder module
portable roadblade module

Additional Tire Spike Modules

Can be added to flush or surface mount

flush mounted tire shredder
surface mounted tire killers

One-Way Tire Spike module end caps

  • Ask for FREE upgrade to anti-slip paint
end_caps_with_anti_slip_paint

Replacement Road Blade  -Blades:

  • Blade height is 2 3/4 inches; width is 3 7/8 inches.
  • Comprised of 17-4PH Stainless Steel, CB7Cul, ASTM A747.
    Solution annealed and aged (H925 condition) to a hardness of RC38 min.
  • Finish of Blades are 125 RMS.
  • Blades are power coated black.
tire shredder blade

Surface Mounted Blade Replacement Package.

  • Drop in, ready package. Just unbolt 4 bolts, pull old section out, place new in and screw in 4 bolts.
  • P/N RB-36-FTP
  • Includes:
  • Blade
  • Blocks
  • Springs
  • Bolts
RB_36-FTP_surface_complete__drop_in_pack

Surface Mount, One-way Blade replacement kit.

  • P/N RB-36-RTS
  • Includes:
  • Blades
  • Blocks
  • Springs
RB_36-RTS-surface_complete_blade

Replacement Surface Mounted One-Way Tire Spike blades, or Spikes.

  • individual blade ONLY
  • P/N RB-36-01
RB_36-01_surface_blade_only

One-Way tire spike replacement springs:

  • P/N RB 36-02
  • Used on either surface mount or flush mounted systems
  • Springs ONLY
RB_36-02_springs_only

Surface Mount One-Way Top Plate

  • P/N RB-36-08
  • Top plate ONLY
TS_surface_top_plate_only_100

Bolts

  • Set of 4 hex head bolts ONLY
  • Used on both surface and flush mount one-way tire spikes
  • P/N RB 36-202
RB_36-202_bolts_only

Replacement Spring / Blade Blocks

  • Sold as a set of two. One spring side, one opposite side
  • P/N RB-36-03
  • P/N RB-36-04
RB_36-04_open_side_block
RB_36-03_spring_side_block_1

Flush Mounted Blade Replacement  Package

  • Drop in, ready package. Just unbolt 4 bolts, pull old section out, place new in and screw in 4 bolts.
  • P/N RB-72-3-FTP
  • Includes:
    Blade
    Blocks
    Springs
    Bolts
RB_72-3-FTP_flush_complete_blade_section_pack

Flush Mount, One-way Blade replacement kit

  • P/N RB-72-RTS
  • Includes:
    Blades
    Blocks
    Springs
RB_72-RTS_flush_blade_kit

Flush Mount One-Way Top Plat

  • P/N RB-72-05
  • Top plate ONLY
RB_72-05_flsuh_top_plate_only

Surface Mounted Permanent Epoxy

  • Used to permanently secure surface mounted units directly to the road.
  • Can be used on asphalt or concrete
  • P/N RB-36-Epoxy
RB_36-Epoxy_surface

Heating Elements:

  • Used with any Flush Mount system
  • includes:
  • Heat Cables
  • Thermostat
  • Ice Melt Cables
  • Ice Melt Power Kit
road blase tire spike system with heating elemenets

Red / Green 110 Volt Lights:

For Road Blade applications.

  • Plastic housing with eyebrows
  • Red indicator lights alerts motorist when blades are up
  • Green indicator light alerts motorist when blades are down
lights

Light Mounting Bracket:

For Road Blade.

  • Sold in set of two
  • 1 set of two required per light housing- top and bottom support
  • One way direction mount
  • Can be bolted to wall or banded to pole.
Mounting bracket plastic

High Performance Arm Barriers:

  • 1 per system up to 15 feet
  • 24" x 24" High intensity prismatice reflective sheeting
  • Aluminum sign for rust resistence
arm barrier

Additional Power Cable:

  • Standard length of 20 feet - additional lengths available upon request.
  • 8 gauge 2 conductor with ground wire.
  • Provides power to the actuator box.
  • Pigtail connection run through junction box and conduit.
  • Terminates at labeled pigtail inside Pole Mount Box.

 

tires shredders power cord

Additional Communications Cable:

  • Standard length of 20 feet- additional lengths available upon request.
    16 gauge 7 conductor wire.
  • Provides input commands to the actuator motor to raise and lower the blades.
  • Pigtail connection runs through junction box and conduit.
  • Terminates at labeled pigtail inside of Pole Mount Box.
communications cable for tire shredders

Warning Signs:

  • 2 per system- one facing each direction of traffic
  • 24" x 24" high intensity prismatice reflective sheeting
  • Aluminum sign for rust resistence
TS DSWF1824_warning_sign_1
TS DSWF1824_warning_sign_2
sign

Sign Mounting Poles

TS SP60_mounting_post_1

NEW: Manual Arms.

  • 12 foot arms, standard
  • Counter balanced for easy use
  • Bolts directly to road surface, no major construction required.
Manual Arm Barrier (1-22-18)
MAB back cross - arm up view